In January 2013 we started the design process on the Mopit 4, and in February 2015 the first Mopit 4 rolled off the assembly line. The Mopit 4 is the fruit of two years of brain storming, engineering, and design work.
So what has changed on the Mopit 4? Here are a few of the most notable improvements.
All prior Mopit models had the same cleaning performance. The Mopit 4 has two improvements that improve cleaning performance. The Mopit 4 puts out .18 gallon per minute of cleaning solution. This is nearly double the water output of our prior Mopits. More cleaning solution on the floor increases cleaning performance. Don’t worry, the water flow is easily adjustable, so you can make your cleaning solution last longer if you choose. The Mopit 4’s cleaning solution tank is now on the top instead of on the bottom of the Mopit. This increases water pressure, and improves cleaning performance and consistency.
The Mopit 4 is five decibels quieter than our previous models. The vacuum motor is the loudest Mopit component. On the Mopit 4 we have placed the motor deeper within the plastic to make it quieter. This means that the Mopit 4 is more pleasant to use around your customers.
The Mopit 4 is more compact than the Mopit 3 and the Mopit 2. It is five inches shorter than the Mopit 3 and nine inches shorter than the Mopit 2. Even though the Mopit 4 is more compact, the fresh water capacity has only shrunk by ¼ gallon. We understand that storage space is very limited for most of our customers, and so having the Mopit be as compact as possible was one of our goals. The Mopit cleaning path of 15 inches is the same as the Mopit 3.
The Mopit 4 is our simplest to operate Mopit. Mold-in labels indicate where to fill the Mopit, where the water valve is located, where the water filter is located, where to drain the Mopit, and they indicate how much cleaning solution remains. The dash board label is larger and easier to read. These labels make the Mopit more intuitive to use and reduce training time. The solution flow valve, and water filter are now conveniently located on the back of the Mopit instead of underneath. The cleaning solution gauge is much more visible on the Mopit 4.
The Mopit 4 comes standard with an improved 24 volt 5 Amp on-bard battery charger. On prior Mopits if you discharged the Mopit batteries below 12 volts, the battery charger could not charge them. This new battery charger will re-charge batteries that have been discharged down to 0 volts.
The Mopit 4 has a squeegee lift pedal instead of a squeegee lift handle. On prior Mopit models to lift the squeegee you had to bend over and twist the squeegee lift handle with your hand. The Mopit 4 has an easy to use squeegee lift pedal that you can operate with your foot. It is very durable, as it is made out of ½ inch thick aluminum. Lifting the squeegee allows you to make multiple scrubbing passes without picking up the water. This is useful for very dirty or greasy areas, and it is known as double-scrubbing.
The Mopit 4 brush cavity has been completely re-designed. All prior model Mopits had two problem areas with the brush hood. 1. The cleaning solution delivery tray or tube was contained inside the brush cavity. After regular Mopit use the delivery tray or tube would become covered with debris, which reduced the amount of cleaning solution getting on the floor. 2. The inside of the brush hood would become caked with debris build up. This build up reduced cleaning performance. The Mopit 4 brush hood solves both of these issues. The cleaning solution drip tube is now outside of the brush cavity and protected by the splash guard, so it stays clean. The Mopit 4 brush hood cavity now follows the contour of the brush, so that debris build up is much more limited. The Mopit 4 brush hood height is lower, so that it can get under lower shelving. The Mopit 4 has two splash guards, one in the front and one in the rear of the brush. These guards keep the underside of the Mopit clean. Although the brush hood looks like plastic, it is actually high grade aluminum that has been extruded, and then anodized black.
The squeegee blade is the highest maintenance item on the Mopit. While replacing the squeegee blade on prior model Mopits is not difficult, it does take a few minutes, and it can dirty your hands. It is also possible to install the squeegee blade backwards. All of this is solved with the Mopit 4. The Mopit 4 squeegee bar is made out of extruded aluminum. It has three channels, a channel for the front and rear blades and a channel for the suction. The channel for the front blade has a triangle shape, and the channel for the rear blade has a round shape. To replace the squeegees simply remove the squeegee wheel, slide out the old blades, and slide in the new blades. It is impossible to put the blades in backwards. The Mopit 4 is our first Mopit with reversible blades, so you can get more life out of them. The suction channel is also larger, so you can pickup ice cubes or other debris more effectively.
The Mopit 4 is easier to service and maintain. The cleaning solution filter is now on the back of the Mopit instead of underneath. It is twice the size of previous filters, so the cleaning frequency has been reduced. The water solenoid is conveniently located on the back of the Mopit, behind the battery cover, instead of underneath. The squeegee hose is much easier to access than on the Mopit 3. This hose will occasionally need to be back-flushed, so we designed easy access to it. We added significant brush bearing protection to the Mopit 4 to increase bearing life. One of our goals with the Mopit 4 was to be able to ship a complete Mopit on UPS. Because the Mopit 4 is more compact, we have attained this goal. For our lease customers we can ship complete replacement Mopits on UPS, instead of sending halves of machines, or shipping them on a pallet.
A common issue with prior model Mopits is odor build up. The most common cause of odor build up is caused by customers not draining the dirty water. The dirty water tank, and the cleaning solution tank floors are sloped on the Mopit 4. This ensures complete draining after use, and helps to eliminate odor build up. The Mopit 4 has an on-board Allen wrench tool, for easy servicing. There is also a QR code on the Mopit 4. This QR code can be scanned with a smart phone, and can be used to order supplies, and our Tech support agents can also use it to help you with troubleshooting.
The Mopit 4 is built to last. Our competitor’s floor scrubbers are built primarily of plastic. The Mopit 4 has 40 individually machined parts out of high grade aluminum. Our competition puts expensive circuit boards and electronics into their machines. This means if something goes wrong you may need a technician to diagnose the problem. After you pay for a technician to diagnose the problem then you get to pay for an expensive repair. Not only will competitor machines cost you a lot of money to repair, but simple maintenance items like squeegee blades will cost you a small fortune.
Through experience we have learned that the floor cleaning industry wants a machine that is simple and inexpensive to operate, maintain, and repair. The Mopit has no expensive circuit boards or electronics. Diagnosis is simple and can usually be done on your own or with a phone call to Spectrum. If something goes wrong with your Mopit, don’t worry, chances are the average convenient store employee will be able to complete the repair.
NOTE: The deep scrub feature has been removed from the Mopit 4, and is no longer available.